HSSC JE Mechanical Previous Year Question Paper Pdf

HSSC JE Mechanical Previous Year Question Paper Pdf

HSSC डिपार्टमेंट ने हाल ही में JE Mechanical के लिए भर्ती की अधिसूचना जारी की है.इसके लिए लाखों उम्मीदवार आवेदन करेंगे और इसकी परीक्षा की तैयारी करेंगे  जो भी उमीदवार HSSC JE Mechanical की परीक्षा की तैयारी उनको अपनी तैयारी पिछले साल के पेपरों से करनी चाहिए .इससे उम्मीदवार को पता चल जाता है की इसका पेपर कैसा आता है .और उनकी तैयारी भी अच्छे से हो जाती है .इसलिए आज हम इस पोस्ट में आपको HSSC JE Mechanical का पिछले साल का पेपर दिया गया है .इन्हें आप अच्छे से पढिए .क्योंकि यह प्रश्न HSSC JE Mechanical परीक्षओं में आते रहते है .यह आपके लिए फायदेमंद होगा .

1. A steel bar of 5 mm is heated from 15 Deg centigrade to 40 Deg centigrade and it is free to expand. The bar will induced

2. What is the Maximum Strength prescribed for State Legislative Assemblies?

3. Which is not the concern of the Local Government?

4. People consuming alcohol in heavy quantities generally die because of:

5. The National Commission for Minorities was constituted in the year

6. The maximum diameter of the hole that can be punched from a plate of maximum shear stress 1/4 of its maximum crushing stress of punch is equal to (where t = thickness of the stress)

7. When shear force at a point is zero then bending moment is ...... At the point

8. A Pelton wheels develops 1750 kw under a head of 100 M while running at 200 R. P. M. and discharging 2500 liters of water per second the unit power of wheel is

9. The National Policy for Empowerment of Women was adopted in the year

10. ''Darwin finches' refer to a group of:

11. Which one of the following forces is a 'dissipative force?

12. Shivasamudram Falls is found in the course of river:

13. The most endangered Asiatic top predator on the edge of extinction is

14. A series of lines connecting places having a quake at the same time are called

15. Vitamin A is rich in

16. The dried flower buds are used as a spice in

17. In a ventilated disc brake performance :

18. Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission?

19. If the air fuel mixture in spark ignition engine too rich then air fuel ratio is about

20. Draft on pattern is provided for

21. Which of the following operation can not be performed on a lathe

22. Cost iron is a

23. Prime Minister Narendra Modi has set up recently a Mobile and Electronics Manufacturing Hub in

24. Who amongst the following was appointed as first male member of National Commission for Women

25. The government of India is establishing an Atomic Research Centre.

26. The pump with the low initial cost and low maintenance cost is :

27. Who established the forts at Tarori and Hansi in the 12th century :

28. A refrigerant used in domestics refrigerators is.

29. Haryana main seasonal river Ghaggar enters the state near.

30. When a bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakage at the

31. One of the following methods is adopted for governing of steam turbines in a power plant.

32. When the sleeve of a porter governor moves upward the governor speed.

33. Discharge of a centrifugal pump is.

34. A hydraulic coupling belongs to the category of

35. In a turning moment diagram the variations of energy above and below the mean resisting torque line is called

36. The acceleration of a particle at any instant has two component is radical component and tangential component. These two components will be:

37. Which of the following district does not falls under Ambala Division

38. When the steel is normalized its

39. Which project is being launched in Haryana for the welfare of poor girls?

40. The maximum frictional force which comes into play when a body just begins to slide over the surface of the other body is known as

41. Which of the following are warm blooded animals?

42. In order to avoid tearing of the plate at an edge the distance from the center line of the rivet hole to the nearest edge of the pates should be equal to (diameter of rivet)

43. The primary unbalanced forced is maximum .......... in one revolution of the crank.

44. Where is the Motilal Nehru sports school situated at Haryana?

45. Rapping allowance is provided on a pattern to take care of:

46. Vikas Krishan Yadav, a boxer, who won the gold medal in the 2010 Asian Games hails from:

47. The speed of an imaginary turbine identical with the given turbine which with develop a unit power under a unit head is known as

48. Which of the following district does not falls under Gurgaon Division

49. In second type levers

50. Which one of the following folk dances belongs to Haryana?

51. Tau Devi Lal Stadium situated at Panchkula came into prominence because

52. Dye penetrant method is generally used to locate

53. According to Indian standard specification 100 H/g 5 means that the

54. Who was the second Chief Minister of Haryana

55. Which of them is Important tributaries of river Ghaggar.

56. Which of the following district does not falls under Hisar Division

57. Which of the following famous personality belong to Haryana:

58. With what name the river Markanda of Haryana was known in the ancient times.

59. An open belt drive is used when

60. Vijender Singh Beniwal, middle weight boxer of Haryana, hails from.

61. Power required to drive a centrifugal pump is directly proportional to ...... of its impeller.

62. An air craft gas turbine operates on.

63. Brasses and bronzes are welded using:

64. 2018 FIFA World Cup would be held in

65. In industry of the developed nation the type of production most often occurring is.

66. Two circles of radii 4cm and 9cm respectively touch each a common tangent touches then at the points Pand Q respectively. Then the area of a square with one side PQ is.

67. In the certain examination, 77% candidates passed in English and 34% failed in Mathematices. If 13% failed in both the subjects and 784 candidates passed in both the subjects, then the total number of candidates was.

68. The number 20% more than 80 in.

69. If the ratio of cost price of an article be as 10:11,the percentage of profit is.

70. The average mathematics marks of two Sections A and B of Class IX in the annual examination is 74. The average marks of Section A is 77.5 and that of Section B is 70. The ratio of the number of students of Section A and B.

71. The output of a gas turbine is 300 kw and its efficiency is 20% the hit supplied is.

72. Choose the correct alternative from the given ones that will complete the seriesYX, UTS, ONML, ?
73. Select the related letteres/word/number from the given alternatives, Accommodation : Rent :: Journey : ?

74. In upcut milling the work piece is fad

75. Which of the following is not correct for Sports & Physical Aptitude Test (SPAT):

76. Which of the following is not used as a refrigerant

77. Upsetting is the term used in one of the following operations.

78. The operation of enlarging of a hole is called.

79. Peacock & Chinkara Breading Centre, Jhabua is situated at in.

80. Nar Naryan Cave is situated in.

81. Madhogarh Hill is situated in.

82. Reducing flame is obtained in oxyacteylane welding with.

83. Mandrels are used to hold

84. Fresh desk recently elected Mr.Nishant Rao as its COO. Mr. Nishant Rao was as

85. Feed in a lathe is expressed in

86. Second battle of Panipat was fought in the year

87. How many sub-divisions are there in Haryana.

88. Identify the wrong number in the series - 21, 28, 33, 35, 37, 36

89. State of Haryana came into being on 1st November, 1966 as.

90. Find the correctly spelt word -

91. A is a father of C and D is son of B, E is brother of A. If, C is sister of D how is B related to E?

92. Choose the one which best expresses the meaning of the given word. 'Eulogy'

93. First battle of Panipat was fought between

94. Which one of set of letters when sequentially placed at the gaps in the given letter series shall complete it? Ac_cab_baca_aba_aca

95. Choose the word, which can be substituted for the given words/sentence. An object or portion serving as a sample.

इस पोस्ट में HSSC JE Mechanical 2015 Question Paper HSSC JE Mechanical Sample Question Paper 2019 HSSC JE मैकेनिकल पिछले वर्ष के प्रश्न पत्र hssc je mechanical previous paper hssc je mechanical question paper HSSC Junior Engineer Mechanical Mock Test HARYANA HSSC JE MECHANICAL ONLINE TEST SERIES HSSC JE MECHANICAL 2019 Practice sets से संबंधित ऑनलाइन फ्री टेस्ट दिया गया है यह ऑनलाइन टेस्ट फायदेमंद लगे तो अपने दोस्तों के साथ शेयर करें और इसके बारे में आप कुछ जानना यह पूछना चाहते हैं तो नीचे कमेंट करके अवश्य पूछे.

Leave A Reply

Your email address will not be published.

error: Content is protected !!